中文ENGLISH
PRODUCTS
CONTACT
Xuzhou Ruiboer Rubber & Plastic Hose Co., Ltd.
Contact:Lisa_Wang
Mobile:13951356513
Telephone:13951356513
Address:CHENGBEI ECONOMIC DEVELOPMENT ZONE,XUZHOU CITY, JIANGSU PROVINCE,CHINA

NEWS

Home > NEWS
Hose type selection, use, transportation and storage
◆ Ordering Notes
1, according to the actual requirements as the transmission medium and medium temperature, concentration, stress and environmental conditions using the correct selection of hose varieties and specifications and models.
2, the general product catalog Hose follow orders.
3, the directory is not included in the varieties and specifications and technical performance requirements of special hose, by mutual agreement, trial and manufacturing.
4, the product specification table pressure and the number of layers corresponding column, based on pressure-based, layer by reference. With the improvement of production and technology development, the application of new materials, to ensure the working pressure of the premise, the number of layers may change.
5, the length of the length listed in the directory for the production, supply length negotiation by the parties, the short codes can be 15-30% proportion hose along with supply.
◆ hose Caution
Since the hose variety of complex structural diversity, coupled with different conditions, so the hose length of life, not only on their quality is good or bad, but also depends on the proper use and maintenance. So even if the product has high quality, if not the proper use and maintenance, it will seriously affect the quality and longevity of their use, or even should not have a serious accident, causing damage to property. Now offers the following Caution:
1, the hose should be strictly in accordance with different specifications use, not misuse, alternative.
2, when using the hose, without bending over to avoid local deformation of the hose.
3, to attract hose diameter curvature of not less than 20 times the inside diameter of the hose, to prevent internal wire displacement provisions required bending radius bending radius used within the specified range.
4, hose when used strictly prescribed use within the operating pressure range.
5, when the hose used should not heap pressure on heavy machinery and other unwanted effects (especially with metal wire frame hose).
6, when the hose use, as far as possible avoid direct sunlight and close to heating devices.
7, the hose after use, rinse the inside should (especially lose acid tube, spray tube, mortar tubes, etc.)
8, select the appropriate form of metal fittings and specifications, reasonable attachment, so as not to damage the hose, especially in the high-pressure hose is more important.
9, the use of high-pressure hose, bending radius not less than the specified range, due to excessive bending of the hose, the pressure will affect efficiency, prone to early fatigue.
10, to extend the service life and ensure safety, use of pressure, chemical resistance, an organic solvent hose should be checked regularly in each class, deformation and other anomalies found promptly replaced.
◆ hose transportation and storage Precautions
1, when the transport hose, hose shall neatly stacked, flat on the inside, not the other cargo stacked on the hose, when the loading hose may be considered to prevent friction damage in transit.
2, within the transport hose carriage, should not be placed acids, alkalis, oils and organic solvents and other goods.
3, moving with a metal spiral hose, pay attention to light, to prevent damage.
4, hose in the open yard or station, marina store, site must be flat, smooth hose to put together, and covered with tarpaulins.
5, the hose should be stored away from sunlight, rain and snow Baptist leaching, kept clean to prevent contact with acids, alkalis, oils and organic solutions and the like affect the quality of the cargo hose and one meter away from the heating device.
6, when the storage temperature should be maintained within the Treasury between -15 ℃ ~ 40 ℃, relative humidity between 50 to 80%.
7, hoses should be stored flat, the rim of the stack hose should not exceed 1.5 meters, flat storage stack should not be more than 1 meter hose should be spilled up and down once each quarter during storage.


Previous:No!
Next:Xuzhou tube boulder rubber and plastic industry co., LTD hubei hose general distribution
Home ABOUT US PRODUCTS NEWS CERTIFICATE JOB Guestbook CONTACT
Xuzhou Ruiboer Rubber & Plastic Hose Co., Ltd. Copyright
Contact person:Lisa_Wang Mobile phone:13951356513 Telephone:0516-85880288 Address:CHENGBEI ECONOMIC DEVELOPMENT ZONE,XUZHOU CITY, JIANGSU PROVINCE,CHINA
Technical support:Jinqiao network